Decommission WattNode for LonWorks

Decommission WattNode for LonWorks Overview WattNode® for LonWorks® meters are shipped in the unconfigured (or decommissioned) state. But if you install one somewhere, then move it to a new location without decommissioning it first, you can run into two problems, because the meter is already commissioned: There can be an address conflict because the meter’s […]

WattNode Logger for LonWorks

WattNode® Logger for LonWorks AC Power Measurements and Logging for LonWorks Networks: Real Power (kW) & Energy (kWh)Net MeteringReactive Power (VAR)Power FactorIndividual Phase Measurements WattNode Logger for LonWorks The WattNode Logger is a kilowatt hour (kWh) energy meter that communicates on a LonWorks network, and can log 24,000+ measurement records in non-volatile memory. The WattNode [...]

WattNode Plus for LonWorks - Firmware Version 3.38

WattNode for LonWorks – Firmware Version 3.38 Applies To: WattNode Plus for LonWorks WattNode Revenue for LonWorks Release Date: 2013-04-08 Neuron System Image: 17 (unchanged) Program ID: 8:00022:1500:0A:04:07 (unchanged) LonWorks Resource Files: Standard LonMark – Ver 13.0 CControlSys – Ver 1.04 (unchanged). Ver 1.05 is also compatible XIF file: WattNode Plus FT10 XIF File (unchanged) […]

WattNode LonWorks LCD Display

Display for LonWorks Does CCS offer a display for LonWorks® WattNode® meters? No, CCS does not, but there are three options for displaying data from LonWorks WattNode meters: Use PC based software such as Echelon’s LonMaker®. Find a third-party LonWorks display unit. See Engenuity Systems, Inc Smart Network Displays] or LOYTEC electronics GmbH L-VIS Touch […]

LonWorks WattNode Reporting All Zeroes

LonWorks WattNode Reporting All Zeroes Overview In some cases, you may install (commission) a WattNode® successfully, the service LED stops flashing, you can configure the WattNode (set the nciCtAmps), but all measurements report zero, even the voltage and frequency. In almost all cases, this means that the WattNode is Offline. When installing a device, LonMaker […]

WattNode Logger for LonWorks - Firmware Version 3.64

WattNode Logger for LonWorks – Firmware Version 3.64 Production Dates: 2008-12-09 to 2011-08-11 Neuron System Image: 17 Program ID: 8:00022:1500:0A:04:0A LonWorks Resource Files: Standard LonMark – Ver 13.0, CControlSys – Ver 1.04 XIF file: WattNode Logger FT10 XIF File Notes: First LonMark® approved release. This version has been replaced by newer firmware. See WattNode for […]

WattNode Plus Option B - Firmware Version 3.01

WattNode Plus Option B – Firmware Version 3.01 Release Date: 2008-11-19 Neuron System Image: 16 Program ID: 8:00022:1500:0A:04:05 LonWorks Resource Files: none XIF file: WNC-FT-B-30x.XIF Firmware Version: 3.01 Bug Fixes On startup, the firmware wasn’t remembering which non-volatile data bank was used for recovery. In rare cases with two subsequent power failures, both occurring while […]

WattNode Plus for LonWorks Power and Energy Meters

WattNode® Plus for LonWorks® AC Power Measurements for LonWorks Networks: Real Power (kW) & Energy (kWh)Bi-directional Net MeteringReactive Power (VAR)Power FactorIndividual Phase Measurements WattNode Plus for LonWorks The WattNode Plus is a kilowatt-hour (kWh) energy and power meter that communicates on a LonWorks network and measures 1, 2, or 3 phases with voltages from 120 [...]

WattNode-FT10-FW-3.68

WattNode for LonWorks – Firmware Version 3.68 Applies To: WattNode Logger for LonWorks WattNode Revenue for LonWorks with Option L Release Date: 2013-04-08 Neuron System Image: 17 (unchanged) Program ID: 8:00022:1500:0A:04:0A (unchanged) LonWorks Resource Files: Standard LonMark – Ver 13.0 CControlSys – Ver 1.04 (unchanged). Ver 1.05 is also compatible XIF file: WattNode Logger FT10 […]

WattNode LonWorks - Option PT

WattNode LonWorks – Option PT Option PT improves support for potential transformers (PTs), making it easier to use WattNode® for LonWorks® meters with medium voltage services. Specifically, Option PT adds a configuration property UCPTptRatio which configures the ratio of the external PT, allowing the meter to automatically scale the voltage, power, and energy readings. Continental […]