View more information regarding the Power and Energy displays, including information for the displays scale factor and decimal point positions. Download the application notes for additional information.

Note: These displays are being phased out, so please contact Sales for information on availability. Consider using the LCDB-E kWh Pulse Totalizer display.

LCDA-E Energy Display (AN-114)

The LCDA-E energy display has eight digits with an adjustable scale factor and decimal point position, to allow for the accurate display of energy levels from hundredths of a watthour to 100,000 megawatt-hours. By adjusting the scale factor and decimal point position, you can display energy in watt-hours, kilowatt-hours, or megawatt-hours. The LCD display can be used with the Advanced Pulse WattNode with a maximum output frequency of 20 Hz.

LCDA-EP Energy and Power Display (AN-115)

The energy and power display has eight digits with an programmable scale factor and decimal point position. A button is pressed to switch the display between energy (kWh) and power (kW). Energy levels from hundredths of a watt-hour to 100,000 megawatt-hours and power levels from tenths of a watt to megawatts can be displayed. Units of measure for energy can be watt-hours, kilowatt-hours, or megawatt-hours and power displayed in watts, kilowatts, or megawatts. The energy and power display is self-powered for use with the Advanced Pulse WattNode models with an output frequency of 20 Hz.

LCDA-P Power Display (AN-116)

The power display has eight digits with an adjustable scale factor and decimal point position, to allow for the accurate display of power levels from tenths of a watt to megawatts. Units of measure for power can be watts, kilowatts, or megawatts. The power display is self-powered for use with the Advanced Pulse WattNode models with an output frequency of 20 Hz.